The Fluke 715 Volt/ mA Calibrator delivers outstanding performance, durability and reliability. Offered in the rugged Fluke 80 Series DMM package, the calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 715 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.
Features:
- accuracy of 0.015% and 1 mA resolution
- Measure voltage output process signals from PLCs, transmitters
- Source or simulate 24 mA loop current
- Source voltage to 100 mV or 10V
- 24V loop supply with simultaneous current measurement
- Enhanced voltage and current measure and source accuracy
- Improved battery life
- 250 ohm HART resistor with loop power
- Holster features test lead storage
- Compatible with toolpack magnetic hanging system
- Step and linear ramp output function
- Configurable zero and span settings
| Functional specifications |
| Measure / Source mV | | Range: | 0 to 200 mV | | Resolution: | 0.01 mV | | Accuracy: | 0.015% + 2 counts |
|
| Measure / Source V | | Range: | 0 to 20 V | | Resolution: | 0.001 V | | Accuracy: | 0.01% + 2 counts |
|
| Measure / Source/ Simulate mA (% of span) | | Range: | 0 to 24 mA (-25% to 125%) | | Resolution: | 0.001 mA | | Accuracy: | 0.01% + 2 counts | | Note: Sink (simulate transmitter) Display mA or % of span |
|
| Specifications |
| Loop Power | | Range: | 24 V dc | | Accuracy: | +/- 10% | | Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V |
|
| Display | |
| Environmental Specifications |
| Operating Temperature | |
| Storage Temperature | |
| Humidity (Without Condensation) | | 95% (10 ºC to 30 ºC) | | 75% (30 ºC to 40 ºC) | | 45% (40 ºC to 50 ºC) | | 35% (50 ºC to 55 ºC) |
|
| Operating Altitude | |
| Safety Specifications |
| Safety | | CSA C22.2 No. 1010.1:1992 |
|
| Mechanical & General Specifications |
| Size | | 187 mm L x 87mm W x 32 mm | | (7.93 in. L x 3.86 in. W x 2.06 in D) |
|
| Weight | |
| Warranty | |
| Shock & Vibration | | Random, 2G, 5-500 Hz | | 1m drop test |
|
| Battery type | | Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline |
|
The Fluke 715 loop calibrator is supplied with the following;
- AC70A Alligator Clips
- C10 protective yellow holster with Flex-Stand™
- Instruction sheet
- TL75 safety-designed test lead set
- NIST- traceable calibration report and data
- Free ACT calibration certificate
Click on the links below for further information;
FLUKE 705 TECH DATA
Reviews
There are no reviews yet.