ACT offer thermographic surveys designed at trouble shooting a wide variety of issues. Our thermographic survey is designed to offer you a bespoke solution to your problems. The following areas can be catered for in detail ensuring you get back on track with the minimum of fuss;
Thermal Imaging for Building Diagnostics: Missing, damaged, or inadequate insulation, building envelope air leaks, moisture intrusion, and substandard work are costly to residential and commercial building owners. An infrared camera can help you quickly see and find the sources of energy efficiencies, destructive water damage, and structural issues so you can help customers make informed decisions on needed repairs that can help them save energy dollars and stay more comfortable.
The infrared image shows insulation issues on a house facade causing severe energy losses.
Our non-destructive inspections make it easy to isolate cold and warm air infiltration/exfiltration so necessary repairs and improvements can be made to tighten energy efficiency. Our thermal imagers can also instantly show temperature differences that verify what’s wet and what’s dry and are the IR inspection cameras preferred most by building experts for fast, reliable diagnosing of a full range of building applications, from energy audits and restoration to roofing and commissioning.
Thermal Imaging for Energy Auditing & Home Inspection: Thermal imaging for air tightness and energy efficiency are important quality control measures when building or renovating a home. Heat loss can account for up to 50% of total energy consumption in a building with causes ranging from air leakage through chimneys, attics and wall vents to badly sealed doorways and failing argon gas windows to missing insulation.
Detection and Visualization of Air Infiltration and Exfiltration: Adequate air exchange is important for occupant comfort, health and safety, but most buildings have a far higher rate of air leakage than necessary. The root cause is often poor design and/or construction which allows air to leak in or out. Without thermal imaging, the source of these drafts can be extremely difficult to detect and visualize. But with thermal imager in hand our inspectors can readily uncover the source of the heat issue, leading to helpful advice on the best improvements and repairs to stop energy loss.
New buildings must meet modern energy efficiency standards and building codes. Reducing drafts and heat loss due to poor insulation, not only do homes and businesses become more comfortable, customers conserve energy and save considerably on utility bills.
Thermal Imaging for Property & Facility Management: Infrared thermography is a powerful, non-invasive way to monitor and troubleshoot building envelope and structural problems as well as electrical/mechanical issues, whether it’s at an apartment, office complex, or manufacturing plant.
Inspection of this fuse box discovers that the two left connections are overheated.
Stop Guessing – Start Seeing: Thermal imaging detects the infrared energy of any surface and produces a detailed image showing its temperature profile. Non-destructive and non-contact, the technology provides a safer, more cost-effective way to evaluate a building’s performance. It also has proven to be very effective and accurate tool for facility predictive maintenance (PdM) programs.
Thermal Imaging for HVAC & Plumbing: A “whole building” approach is needed to maximize energy efficiency whether it’s for home or business. Indoor comfort and air quality can be compromised by poor insulation, failing windows, leaky doorways, loose ductwork, plumbing leaks, or mechanical issues relating to HVAC systems.
An inspection of a ceiling heating system shows several hotspots.
HVAC specialists and plumbing professionals get to see the heating and cooling issues in a whole new way. Since your profession is primarily about temperature control, why wouldn’t you use a tool that helps you visualize the problems that your customers can feel and are complaining about? Our survey’s enable you to check air balance easier, locate air leaks and misrouted ductwork faster, and check for weatherisation and other wasteful energy loss issues to confirm it’s not the furnace or AC that’s the culprit. Survey’s can be used to find clogs in drain pipes, locate hot and cold water lines in walls, and more.
Thermal Imaging for Moisture & Restoration: Whether you need to restore property from moisture, mold, or fire damage, you know the value of having comprehensive and accurate information at your fingertips. Insurance companies need information fast to start claims work. Your customers need information so they can get their property restored. And you need information so you can make estimation and reporting trouble free.
- Trouble Shooting (Examining your problems in detail and putting forward solutions.)
- Professional survey using the latest Thermal image camera’s and software
- Qualititive and Quantitive survery’s available
- Survey’s undertaken by a ITC Category 1 Certified Thermogrpaher
- Survey’s carried in accordance with ISO184
Half Day thermographic survey’s are available in the following areas. See below for areas & postcodes;
West Midlands Area: Postcodes ST/TF/WS/B/CV/OX/G/HR/WR/B/DY/WV/TF
East Midlands Area: Postcodes S/NG/LE/NN/DE
North West Area: Postcodes LA/FY/PR/BB/OL/BL/WN/L/WA/M/SK/CW
North East Area: Postcodes DL/DH/SR/TS/BD/HG/YO/LS/HX/HD/LS/WF/DN/LN
Scotland & Borders Area: Postcodes KW/IV/AB/DD/PH/PA/FK/KY/G/EH/ML/KA/DG/TD/NE/CA
East Anglia Area: Postcodes PE/NR/IP/CB/CO
South East Area: Postcodes MK/SG/LU/HP/AL/CM/SS/ME/CT/TN/RH/BN/PO/GU/RG/SL/HP
London Area: Postcodes WD/EN/RM/DA/IG/BR/CR/KT/TW/UB/HA/E/EC/NW/SE/SW/W/WC
South West Area: Postcodes TR/PL/TQ/EX/BS/SN/SO/SP/BA/TA/BH/DT
South Wales Area: Postcodes SA/LD/CF/NP
North Wales Area: Postcodes LL/CH/SY
Offshore & Northern Ireland Area: Postcodes BT/ZE/JE/GY/IM
(Note: Half Day is considered a visit of up to 4 hours.)
Reviews
There are no reviews yet.