Megger MIT417 Insulation Tester

Megger MIT415 (MIT415-EN) Insulation & Continuity Tester

• CATIV 600V applications
• Insulation testing to 1000V and to 200GΩ
• TRMS & DC Voltage measurement
• Continuity testing at 200mA down to 0.01Ω
• Analogue and dual digital display
• Insulation & continuity limit alarms
• PI/DAR and Timer function
• Test result storage
• Bluetooth wireless data transfer
• Free calibration certificate included

The MIT415/2 and MIT417/2 (1004-738) insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc.

Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%.

Continuity testing is now significantly faster, and a single autoranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.

Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access.

All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.

The MIT415/2 and MIT417/2 include additional low voltage insulation test voltages at 10 V and 25 V for ESD and low- voltage signal-wire testing as found in elevators. The MIT415/2 also incluses a display option to show 105, 106, 107 instead of the usual KΩ, MΩ, GΩ etc.

ACT recommend the use of 1002-015 fused test leads with this product. 

Click on the link below to download the data sheet

MIT400