Dilog DL9130EVKIT Multifunction Tester & DLEV1 Electrical Vehicle Charger Adaptor

This kit comprises the Dilog DL9130EV multifunction tester with DLEV1 charging point adaptor. Unbeatable value saving over £200 on the nearest competitors kit. Full specification on both of these products follows below;

DL9130EV 18th Edition Advanced EV MFT
The DL9130EV 18th Edition Advanced EV MFT has been explicitly designed for engineers that offer EV installation as part of their testing portfolio.

The DL9130EV has several exciting new features critical to the safe verification of EVSE Charge Station Installations. Including a 6mA pure DC test for RDC-DD verification which can be combined with a full Auto EV testing sequence. The Auto EV sequence feature simply varifies the DC protection provided by the EV charger, along with the Type A RCD protection provided by the sub distribution board.

Brand New Features
A brand-new feature explicitly added to the DL9130EV is Rmax. This brand-new concept will automatically capture the maximum R1+R2/R2 continuity test reading which will register the result on the secondary display for recording once testing is complete. In addition, Di-LOG has added the Zmax feature.

Type B RCD Testing
Type B RCDs are becoming more frequent in PV and EV installations, so it is vital that when needed, your multifunction tester can perform a Pure DC RCD test. A variable RCD feature has also been added to the DL9120 & DL9130EV enabling the user to dial in bespoke mA values when the need arises.

Intelligent User Features a the press of a button
With a brand new RGB colour changing screen that visually indicates potential pass/fail conditions, the DL9130EV offers intelligent user features. One of our intelligent features is Zmax, this will record the maximum Zs test recorded during a recording session. A fully automated Continuity & Earth Loop Auto Start with a secondary display to capture the recorded results. Never seen before on a multifunction tester, is the high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection.

The DL9130EV offers incredible value for a feature packed MFT meeting all the safety and performance requirements of BS EN 61557.

Key Features
6ma RDC-DD Pure DC Test
Auto EV Test Sequence
Auto Start Loop & Continuity tests
Type AC, A, B & Selective (S) RCD Testing
Rmax & Zmax
Variable RCD Test
1000V Insulation test
Colour LCD display with colour change feature
Supplied with a UKAS Calibration Certificate fully traceable to national standards

6mA pure DC test for RDC-DD verification and a full Auto EV testing sequence for verifying the DC protection provided by the EV charger, along with the Type A RCD protection
Loop Impedance/PSCC – Unique auto start RCD-LOC XLT loop test principle will not trip any RCD or RCBO
2/3 wire high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection
RGB colour changing screen visually indicating potential pass/fail conditions
Phase to Phase Loop with Phase Rotation Test – will indicate the correct phase sequence
Continuity test – with auto start & null facility to zero out lead resistance
Auto RCD testing – Trip time, trip current, auto test and ramp current
Type AC, A, B & Time Delayed RCDs (S)
Insulation measurement – with 250, 500 & 1000V test voltages
Phase Rotation Test – will indicate the correct phase sequence
Integrated socket polarity test
Fully protected against damage when accidentally connected across phases

EVSE Charge Station Adaptor Kit
The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charge station. Supplied with a type 1 and type 2 connector plug specifically designed for testing, the DLEV1 kit will also simulate PE Pre-test, CP Error “E” and PE Error with the added feature of CP signal output and load connection.

MFT & Load Connection
The DLEV1 has a 13A socket for MFT mains lead or can be used for inline load connection. In addition to this, there are also 4mm input terminals for single or 3-phase connections.

The DLEV1 is universal to all Electrical Installation Multifunction Testers, such as the Di-LOG DL9130EV and can even be purchased as part of our complete EV test kit, the DL9130EVKIT

Key Features
Universal to all electrical multifunctional installation testers
Proximity Pilot (PP) State (NC, 13A, 20A, 32A & 63A)
Control Pilot (CP) State (A,B,C & D)
PE Pre-test
CP Error “E”
PE Error
13A Input for Loading or MFT connection
4mm Input for Single & 3-Phase Chargers
Supplied with Type 1 and Type 2 EV Plug