True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 325 also offers DC current and frequency measurements.
Measurement capability
- 400 A ac and dc current measurement
- 600 V ac and dc voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Resistance measurement up to 40 kΩ with continuity detection
- Temperature and capacitance measurement
- Frequency measurement
Features
- Slim, ergonomic design
- Large, easy to read backlight display
- CAT IV 300V/CAT III 600 V safety rating
- Hold button
- Two-year warranty
- Soft carrying case
| Specifications | | 323 | 324 | 325 | | AC current | Range | 400.0 A | 40.00 A/400.0 A | 40.00 A/400.0 A | | Accuracy | 2 % ± 5 digits
(45 Hz to 65 Hz)
2.5 % ± 5 digits
(65 Hz to 400 Hz) | 1.5 % ± 5 digits
(45 Hz to 400 Hz)
Note: Add 2 % for
position sensitivity | 2 % ± 5 digits
(45 Hz to 65 Hz)
2.5 % ± 5 digits
(65 Hz to 400 Hz) | | DC current | Range | – | – | 40.00 A/400.0 A | | Accuracy | – | – | 2 % ± 5 digits | | AC voltage | Range | 600.0 V | 600.0 V | 600.0 V | | Accuracy | 1.5 % ± 5 digits | 1.5 % ± 5 digits | 1.5 % ± 5 digits | | DC voltage | Range | 600.0 V | 600.0 V | 600.0 V | | Accuracy | 1.0 % ± 5 digits | 1.0 % ± 5 digits | 1.0 % ± 5 digits | | Resistance | Range | 400.0 Ω/ 4000 Ω | 400.0 Ω/ 4000 Ω | 400.0 Ω/ 4000 Ω/ 40.00 kΩ | | Accuracy | 1.0 % ± 5 digits | 1.0 % ± 5 digits | 1.0 % ± 5 digits | | Continuity | ≤ 70 Ω | ≤ 30 Ω | ≤ 30 Ω | | Capacitance | – | 100.0 μF to 1000 μF | 100.0 μF to 1000 μF | | Frequency | – | – | 5.0 Hz to 500.0 Hz | | AC response | True-rms | True-rms | True-rms | | Backlight | – | Yes | Yes | | Data hold | Yes | Yes | Yes | | Contact temperature | – | -10.0 °C to 400.0 °C
(14.0 °F to 752.0 °F) | -10.0 °C to 400.0 °C
(14.0 °F to 752.0 °F) | | Min/Max | – | – | Yes | | Size | H x W x D (mm) | 207 x 75 x 34 | 207 x 75 x 34 | 207 x 75 x 34 | | Max wire diameter | 30 mm (600 MCM) | 30 mm (600 MCM) | 30 mm (600 MCM) | | Weight | 265 g | 208 g | 283 g | | Category rating | CAT III 600 V
CAT IV 300 V | CAT III 600 V
CAT IV 300 V | CAT III 600 V
CAT IV 300 V | | Warranty | Two-year | Two-year | Two-year |
|
|
| |
Fluke 325 Clampmeter is supplied with the following
- Test leads
- Soft case
- User’s manual
- Free ACT calibration certificate
Click on the link below for further information
FLUKE 320 TECH DATA
Reviews
There are no reviews yet.