Fluke Current clamps are the ideal tools to extend the current ranges of Multimeters.
The i200 is a single range 200A ac current clamp with current output via safety shrouded banana plugs. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs
- Companion to a DMM to measure up to 200 A AC
- 1mA per Amp output guarantees easy reading on you meter
- Take accurate current readings without breaking the circuit
- Max. conductor Ø 20 mm
- CAT III 600V safety rating
| Specifications |
| Nominal current range | |
| Continuous current range | |
| Maximum Non-Destructive Current | |
| Lowest measurable current | |
| Basic Accuracy | | 1% + 0.5 A | | (48-65 Hz) | | (% reading + floorspec) |
|
| Useable frequency | |
| Output level(s) | |
| Safety Specifications |
| Safety | |
| Maximum voltage | |
| Mechanical & General Specifications |
| Warranty | |
| Maximum conductor diameter | |
| Maximum conductor size (busbar) | |
| Output cable length | |
| Shrouded banana plugs | |
Compatible with the following range of Fluke equipment;
- Fluke 115, 117
- Fluke 175, 177, 179
- Fluke 233
- Fluke 287, 289
- Fluke 8845A, 8846
- Fluke 8808A
- Fluke 77IV
- Fluke 83V, 87V
- Fluke 88V
- Fluke 1577, 1587
- Fluke 787, 789
Reviews
There are no reviews yet.