These two input ThermaData® thermocouple data loggers are housed in a waterproof, ergonomic case that is designed to meet IP66/67 protection. Two models are available, either blind (291-501) or with LCD display (292-501).
The Thermocouple ThermaData®data loggers measure temperature over the range of -99.9 to 1372 °C with a 0.1 °C resolution, auto-ranging to 1 °C over the range of 301 to 1372 °C. At programmable intervals the loggers will record the temperature, up to a maximum of 16000 readings or 2 x 8000 readings.
Each logger incorporates a red and green LED, the flashing green LED indicates that the logger is active/logging and the flashing red LED indicates that your customised pre-set alarms have been exceeded. Each logger is supplied with a USB lead and ThermaData® Studio Software.
For details of the wide range of thermocouple probes available Click Here!
ThermaData Studio software
The ThermaData logger is connected to a PC via a serial or USB port lead. By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The information can then be analysed by zooming in, storing to disc.
ThermaData Studio Software is compatible with all the ThermaData Logger models, including wireless. The software is both powerful yet user-friendly, enabling temperature data to be organised and analysed to provide management information.
The ThermaData Studio Software has the ability to display up to 32 traces on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The software allows the user to programme the logging sample/interval rate (0.1 to 255 minutes), the real-time clock, °C or °F, delayed start (maximum 23 hours, 59 minutes) or select a manual start option. It is also possible to include a 32-character user ID for each logger.
By selecting continuous logging in the software options, it is possible to start the ThermaData Logger only once and never have to reset its parameters again, even if downloaded regularly. Unlike many loggers, the ThermaData Loggers will continue recording during and after downloading the data.
The ThermaData Studio Software features the facility to send a SMS text message, up to four numbers simultaneously from your computer, when alarm limits have been exceeded. This allows the user to receive timely alarm information which may be critical to their business.
USB Connection Point
Simply remove the end cap to access the USB port. This allows the user to connect the logger to a PC via the USB lead (supplied) and upload the temperature readings collected.
| specification | Thermocouple ThermaData® data logger |
| rangeoperating range | -99.9 to 1372 °C-20 to +50 °C |
| resolution | 0.1 °C to 300 °C thereafter 1 °C |
| accuracy | ±0.4 °C ±0.1 % of reading |
| memory | 16000 or 2 x 8000 readings |
| sample rate | 0.1 to 255 minutes |
| battery | AA Tadiran – Li-SOCl |
| battery lifesensor type | 3 years @ 20 °CK thermocouple |
| display | 10 mm LCD / 2 LEDs |
| dimensions | 35 x 67 x 109 mm |
| weight | 200 grams |
| specification | Stainless Steel ThermaData® data logger |
| rangeoperating temperature | -20 to 105°C-20 to 105°C |
| resolution | 0.5°C |
| accuracy | ±1°C (±0.5°C with calibration utility) |
| memory | 2048 readings |
| sample rate | 1 to 255 minutes |
| battery | 3.6 volt half AA lithium |
| battery life | 3 years minimum |
| dimensions | 22.5 x 129mm (exc probe) |
| weight | 170 grams |
Click on the link for a Data Logger Thermometer Guide
Reviews
There are no reviews yet.