Fluke Current clamps are the ideal tools to extend the functionality of Fluke tools. The i400 is a single range 400 A ac current clamp with current output via safety shrouded banana plugs. The clamp is compatible with most Fluke multimeters or any other current measurement device that accepts 4mm-shrouded banana plugs and has an AC milliamp range. The division ratio is 1000:1.
- Companion to your DMM to measure up to 400 A AC
- 1mA/Amp output guarantees easy reading on you meter
- Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
- Specially designed to offer maximum utility in a very compact shape
- Take accurate current readings without breaking the circuit
- Soft non-slippery overmold handle prevents from accidental touching live wiring
- Max. conductor Ø 32 mm
| Specifications |
| Nominal current range | |
| Continuous current range | |
| Maximum Non-Destructive Current | |
| Lowest measurable current | |
| Basic accuracy | | 2% + 0.06 A | | (45-400 Hz) | | (% reading + floorspec) |
|
| Useable frequency | |
| Output level(s) | |
| Safety Specifications |
| Safety | | CAT IV 600 V, CAT III, 1000 V |
|
| Maximum voltage | | 1000 V AC rms from earth to ground, in compliance with EN61010 |
|
| Mechanical & General Specifications |
| Warranty | |
| Maximum conductor diameter | |
| Maximum conductor size (busbar) | |
| Output cable length | |
| Shrouded banana plugs | |
Compatible with the following range of Fluke equipment;
- Fluke 175, 177, 179
- Fluke 233
- Fluke 287, 289
- Fluke 8845A, 8846
- Fluke 8808A
- Fluke 77IV
- Fluke 83V, 87V
- Fluke 88V
- Fluke 1577, 1587
- Fluke 787, 789
Reviews
There are no reviews yet.